#Uncommenting these urls would only enable
#the power up auto injection and force injection(test case).
# FEATURE_SKY_CP_GPS_TEST_SUPPORT
#XTRA_SERVER_1=http://xtra1.gpsonextra.net/xtra.bin
#XTRA_SERVER_2=http://xtra2.gpsonextra.net/xtra.bin
#XTRA_SERVER_3=http://xtra3.gpsonextra.net/xtra.bin
 XTRA_SERVER_1=http://xtra1.gpsOneXTRA.net/xtra2.bin
 XTRA_SERVER_2=http://xtra2.gpsOneXTRA.net/xtra2.bin
 XTRA_SERVER_3=http://xtra3.gpsOneXTRA.net/xtra2.bin


# Error Estimate
# _SET = 1
# _CLEAR = 0
ERR_ESTIMATE=0

#Test
NTP_SERVER=time.gpsonextra.net
#Asia
# NTP_SERVER=asia.pool.ntp.org
#Europe
# NTP_SERVER=europe.pool.ntp.org
#North America
# NTP_SERVER=north-america.pool.ntp.org

# DEBUG LEVELS: 0 - none, 1 - Error, 2 - Warning, 3 - Info
#               4 - Debug, 5 - Verbose
# If DEBUG_LEVEL is commented, Android's logging levels will be used
DEBUG_LEVEL = 2

# Intermediate position report, 1=enable, 0=disable
INTERMEDIATE_POS=0

# FEATURE_SKT_CP_GNSS_SUPL_CONFIGURATION
# supl version 1.0
#SUPL_VER=0x10000
# supl version 2.0.1
 SUPL_VER=0x20001

# Emergency SUPL, 1=enable, 0=disable
SUPL_ES=1

# GPS Capabilities bit mask
# SCHEDULING = 0x01
# MSB = 0x02
# MSA = 0x04
# ON_DEMAND_TIME = 0x10
# GEOFENCE = 0x20
# default = ON_DEMAND_TIME | MSA | MSB | SCHEDULING | GEOFENCE
CAPABILITIES=0x37

# Accuracy threshold for intermediate positions
# less accurate positions are ignored, 0 for passing all positions
# ACCURACY_THRES=5000

################################
##### AGPS server settings #####
################################

# FOR SUPL SUPPORT, set the following
# SUPL_HOST=supl.host.com or IP
# SUPL_PORT=1234

# FOR C2K PDE SUPPORT, set the following
# C2K_HOST=c2k.pde.com or IP
# C2K_PORT=1234

# FEATURE_SKY_CP_GPS_TEST_SUPPORT
  SUPL_HOST=wpde.nate.com
  SUPL_PORT=7275
  
####################################
#  LTE Positioning Profile Settings
####################################
# 0: Enable RRLP on LTE(Default)
# 1: Enable LPP_User_Plane on LTE
# 2: Enable LPP_Control_Plane
# 3: Enable both LPP_User_Plane and LPP_Control_Plane
LPP_PROFILE = 0

################################
# EXTRA SETTINGS
################################
# NMEA provider (1=Modem Processor, 0=Application Processor)
#FEATURE_SKT_CP_GNSS_SUPL_CONFIGURATION
#NMEA_PROVIDER=0
NMEA_PROVIDER=1

# Mark if it is a SGLTE target (1=SGLTE, 0=nonSGLTE)
SGLTE_TARGET=0


##################################################
# Select Positioning Protocol on A-GLONASS system
##################################################
# 0x1: RRC CPlane
# 0x2: RRLP UPlane
# 0x4: LLP Uplane
# FEATURE_SKT_CP_GNSS_SUPL_CONFIGURATION
#A_GLONASS_POS_PROTOCOL_SELECT = 0
A_GLONASS_POS_PROTOCOL_SELECT = 0x2